Amplificateur 2 Canaux 2x150WRMS @ 4Ohms / 2x250WRMS @ 2Ohms / 1x500WRMS @ 4Ohms bridge
| CEA-2006 Compliant: |
 CEA-2006 Power Rating
150W x 2 @ 4Ω
≤1.0% THD+N |
Rated Power
(RMS Continuous Power): |
150 Watts x 2 @ 4-Ohm
250 Watts x 2 @ 2-Ohm
500 Watts x 1 @ 4-Ohm Bridged |
Total Power
(Sum of Rated Power): |
500 Watts |
Dynamic Power
(PVC/PowerCube®): |
223 Watts x 2 @ 4-Ohms 0° Res
365 Watts x 2 @ 2-Ohms 0° Res |
| Frequency Response: |
20Hz to 20kHz +/- 1.0dB |
| Efficiency (average): |
73% @ 4-Ohm |
| Total Harmonic Distortion (THD+Noise): |
4-Ohm: <1.0%
2-Ohm: <1.0% |
| Signal-to-Noise (CEA): |
>85 dB |
| Channel Separation: |
>50 dB |
| Common Mode Rejection: |
>55 dB |
| Crossover Controls: |
High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
All-Pass: Yes |
| Tone Controls: |
Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Punch EQ2 Treble: 0dB to +12dB @ 12kHz
Function depends upon LP/AP/HP switch position |
| Input Sensitivity: |
150 mV – 12 V |
| Signal Input: |
Hi/Low level: 1 RCA pair |
| Signal Output: |
Low level: 1 RCA pair |
| Power Input Connector: |
Captive C-Clamp |
| Speaker Output Connector: |
Captive C-Clamp |
| Speaker Wire Gauge: |
8 AWG to 18 AWG |
| Heat Sink Type: |
Cast aluminum |
| Remote Controls: |
Optional Punch Level Control (PLC2) Ready |
| Visual Indicators: |
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD |
| Circuit Topology Class: |
Class A/B |
| Operating Voltage: |
9 – 16 VDC |
Recommended Fuse
(not included): |
80 A |
| Max. Current Draw (13.8V Sinewave): |
80 A |
| Average Current Draw (13.8V Music): |
40 A |
| Suggested Alternator: |
75 A |
| Shipping Weight: |
12.3 Lbs. (5.57 Kg.) |
| Dimensions (H x W x D): |
2.38 x 7.76 x 13.28 (in)
6.05 x 19.71 x 33.73 (cm) |
Reviews
There are no reviews yet.