Amplificateur 4 Canaux 4x75WRMS @ 4Ohm / 4x100WRMS @ 2Ohms / 2x300WRMS @ 4Ohms Bridge
CEA-2006 Compliant: |
CEA-2006 Power Rating
75W x 4 @ 4Ω
≤1.0% THD+N |
Rated Power
(RMS Continuous Power): |
75 Watts x 4 @ 4-Ohm
150 Watts x 4 @ 2-Ohm
300 Watts x 2 @ 4-Ohm Bridged |
Total Power
(Sum of Rated Power): |
600 Watts |
Dynamic Power
(PVC/PowerCube®): |
129 Watts x 4 @ 4-Ohms 0° Res
211 Watts x 4 @ 2-Ohms 0° Res |
Frequency Response: |
20Hz to 20kHz +/- 1.0dB |
Efficiency (average): |
68% @ 4-Ohm |
Total Harmonic Distortion (THD+Noise): |
4-Ohm: <1.0%
2-Ohm: <1.0% |
Signal-to-Noise (CEA): |
>85 dB |
Signal-to-Noise (CEA): |
>85 dB |
Channel Separation: |
>50 dB |
Common Mode Rejection: |
>55 dB |
Crossover Controls: |
Front/Rear High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth
Front/Rear Low-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth
All-Pass: Yes |
Tone Controls: |
Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Front Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Rear Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
Function depends upon LP/AP/HP switch position |
Input Sensitivity: |
150 mV – 12 V |
Signal Input: |
Hi/Low level: 2 RCA pair |
Signal Output: |
Low level: 1 RCA pair |
Power Input Connector: |
Captive C-Clamp |
Speaker Output Connector: |
Captive C-Clamp |
Speaker Wire Gauge: |
8 AWG to 18 AWG |
Heat Sink Type: |
Cast aluminum |
Remote Controls: |
Optional Punch Level Control (PLC2) Ready |
Visual Indicators: |
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD |
Circuit Topology Class: |
Class A/B |
Operating Voltage: |
9 – 16 VDC |
Recommended Fuse
(not included): |
100 A |
Max. Current Draw (13.8V Sinewave): |
90 A |
Average Current Draw (13.8V Music): |
45 A |
Suggested Alternator: |
75 A |
Shipping Weight: |
12.8 Lbs. (5.80 Kg.) |
Dimensions (H x W x D): |
2.38 x 7.76 x 13.28 (in)
6.05 x 19.71 x 33.73 (cm) |
Reviews
There are no reviews yet.