Ampli R500X1D
220,83 €
1X 250 Wrms sous 4 ohm ou 1X 500Wrms sous 2 ohm
| CEA-2006 Compliant: |  CEA-2006 Power Rating300W x 1 @ 4Ω ≤1.0% THD+N |
| Number of Channels: | 1 |
| Rated Power (RMS Continuous Power): |
300 Watts x 1 @ 4-Ohms 500 Watts x 1 @ 2-Ohms |
| Total Power (Sum of Rated Power): |
500 Watts RMS |
| Dynamic Power (PVC/PowerCube®): |
333 Watts x 1 @ 4-Ohms 0° Res 647 Watts x 1 @ 2-Ohms 0° Res |
| Bridgeable: | No |
| Frequency Response: | 20Hz to 250Hz +/-1dB |
| Efficiency (average): | 89% @ 4-Ohm |
| Total Harmonic Distortion (THD+Noise): | 4-Ohm: <1.0% 2-Ohm: <1.0% |
| Crossover Controls: | Low-Pass (LP): 50Hz to 250Hz @ 12dB/octave Butterworth |
| Tone Controls: | Punch Bass: 0dB to +12dB @ 45Hz Phase Control: Variable 0° to 180° |
| Input Sensitivity: | 150 mV to 4 V |
| Signal Input: | Low Level: 1 RCA Pair |
| Signal Output: | Low Level: 1 RCA Pair |
| Power Input Connector: | Screw Terminal |
| Power Wire Gauge: | 4 AWG |
| Speaker Output Connector: | Screw Terminal |
| Speaker Wire Gauge: | 8 AWG |
| Heat Sink Type: | Extruded Aluminum |
| Cooling: | Convection |
| Remote Controls: | Punch Level Control: When connected is linked to "gain control" to provide remote output level |
| Visual Indicators: | Power Protect |
| Circuit Topology Class: | Class-D |
| Operating Voltage: | 9 – 16 VDC |
| Recommended Fuse (not included): |
50 A |
| Max. Current Draw (13.8V Sinewave): | 50 A |
| Average Current Draw (13.8V Music): | 25 A |
| Suggested Alternator: | 75 A |
| Shipping Weight: | 5.1 Lbs. (2.31 Kg.) |
| Dimensions (H x W x D): | 1.98 x 6.77 x 8.5 (in) 5.02 x 17.19 x 21.59 (cm) |
| Dimensional Diagram: |  |
- Additional information
- Reviews (0)
Additional information
| Weight | 6 kg |
|---|
Reviews
There are no reviews yet.